EKO Installation.

The EKO wall-mount installation dimmer is available in 6, 12 and 24 channel versions with a choice of output capacities.

EKO dimmers incorporate a cleverly designed installation frame that can be fixed in position without the dimmer being present.

Load and control screw terminals on the frame allow for building wiring to be terminated in a clear and unhindered manner.

When the installation is ready for commissioning, the dimmer can be hung on the installation frame and output circuits then plugged into the special screw terminals – the 24 channel dimmer can easily be installed onto the frame and made fully operational in under 5 minutes!

After installation, internal electronics can be easily accessed through the lockable hinged front door.

The door has been designed with reversible hinges and lock allowing the dimmer to be customized to suit the installation environment.


Features:

    Unique Functionality:

    • One lighting system with Push Button and/or Live Console Control. Each individual channel on the EKO can be set to DMX only, Architectural only, or the unique Auto switch mode for dual control
    • Auto DMX/Architectural switching, ensures that the EKO always works as expected. Once DMX is disconnected the system automatically changes back to wallplate control after a preset time delay of 30 seconds to 5 minutes
    • TruPower option. Allows any channel to be set to be dimming or direct mains power - a world first introduced by LSC
    • Easy Installation. The EKO is provided with a separate installation frame to allow the mechanical mounting and electrical connections to be completed without the dimmer rack being onsite. This ensures no damage from 3rd party tradespeople to the dimmer, as well as helping with cash flow, as the frame can be purchased months ahead of the dimmer rack
    • Max Level Setting - Save energy, save lamp life, save lamp maintenance
    • Intelligent Power up at last known state. The system returns to the last lighting state after a short term power failure. If the power fail is longer than 2 hours, then the unit powers up with all channels off

    Dimmer module:

    • Low profile installation dimmer in 6, 12 and 24 channel versions
    • 13 Amp or 25 Amp output capacity per channel
    • Designed for quick installation and termination
    • Optional RCD per phase per 12 channels or RCD per channel (RCBO)
    • 100% duty cycle rated across all channels simultaneously
    • Variable speed Fan cooling

    Control module:

    • Graphical LCD panel with touch screen operation
    • DMX512A compatible with link thru connector and input termination switch
    • CE and Ctick approved

    Technical facts:

    EKO324

    EKO312

    EKO612

    EKO606

    Number of Dimmer channels

    24

    12

    12

    6

    Channel output rating

    13 Amps

    25 Amps

    Channel output connector type

    4mm2 screw terminal

    10mm2 screw terminal

    TruPower option

    Option that allows each channel to be set to dimming or direct mains power via relay

    Channel MCB breaking capacity

    6000 Amps

    Channel MCB type

    1-Pole MCB or optional 2-pole RCBO

    RCD protection option (Qty)

    Yes

    Yes

    Yes

    Yes

    Current control technology

    Yes

    Dimmer curve selection per channel

    Yes

    Scene storage

    Yes

    Power switching component

    Triac

    Inductor rise time

    200us

    Channel output mimic LEDs (Qty)

    Yes

    Yes

    Yes

    Yes

    DMX data and LSCNET indicator LEDs

    Yes

    Operational STATUS indicator LED

    Yes

    DMX512 input and link thru connector

    Yes

    DMX512 input termination switch

    Yes

    Number of cooling fans

    2

    1

    2

    1

    Fan cooling control

    Variable

    External software upgradable

    Yes

    Power up in last known state

    Yes

    50/60Hz frequency auto-select

    Yes

    220V three-phase current (per phase)

    104 Amps

    52 Amps

    100 Amps

    50 Amps

    Chassis style

    Wall mount installation dimmer with hinged front door

    Dimensions (mm)

    480W x 824H x 135D

    480W x 549H x 135D

    480W x 824H x 135D

    480W x 549H
    x 135D

    Weight (kg)

    35

    27

    30

    21

    Construction

    Made from aluminium and corrosion resistant steel finish in powdercoat with rear screened polycarbonate labels


    For further information please contact your Pro Systems Group dealer.

    More about this product

    Galleries: