GenVI - The Advanced Dimming System.

Equally at home in the lighting, sound and video markets, for portable or permanent installation, the new GenVI Advanced Dimming System allows you to configure any of its outputs in any combination, to be an 8 bit or 16 bit dimmer or a direct power relay channel. This enables GenVI to dim traditional lamps or power moving lights, LED fixtures, video screens or audio power amplifiers—in fact anything where controlled power distribution is needed.

The colour touchscreen offers the user the ability to set each channel individually, control the outputs locally and view any external fault conditions that may be present.

As well as having local and DMX control, GenVI is also RDM (Remote Device Management) enabled, allowing the user to change the DMX address of the unit, and view any fault conditions including over-temperature and loss of phase or DMX signal from any RDM controller.

Each circuit on the GenVI is protected by an RCBO (combination MCB + 30mA RCD) protection on each circuit rated at either 13A, 16A or 20A. Optional Neutral disconnect MCBs can be provided where RCDs are not desirable.

The GenVI Advanced Dimmer System offers a sophisticated riggers' control that can replay scenes or chases, each of which can be individually programmed in addition to a "DMX loss" scene that can be activated as an emergency back up on loss of a DMX signal. This emergency backup scene can be programmed via the front panel controls or via a snapshot of the DMX input signal.


Features:

  • Dimmer & Power Distribution
  • Combined MCB/RCD per channel
  • Auto Power Mode - switches Relaychannels On when DMX is applied and Off when DMX is no longer present
  • Dimmer channels can be 8 bit or 16 bit
  • RDM - Remote Device Management enabled
  • On-board Help Screens
  • Visual Alarms for Phase fail, over temperature and loss of DMX
  • PTFD Dimming (Pulse Transformer Fired Dimming)
  • Local Riggers Control
  • Auto Fan Control (user defined)
  • Colour Touchscreen with simple and intuitive navigation

Technical facts:

GEN12/13

GEN12/16

GEN6/20

Channels

12

12

6

Max Load per channel

13 Amps

16 Amps

20 Amps

Thermal / Magnetic Breakers

Yes

Yes

Yes

RCD/GFI protection

Yes

Yes

Yes

RCD/GFI Current Trip

30mA/Channel

DMX-512A input with RDM functionality

Yes

Yes

Yes

Control Surface

3.2" color LCD with touchscreen

Min and Max trip levels per channel

Yes

Yes

Yes

Remote monitoring and control via RDM

Yes

Yes

Yes

Auto Power Mode - switches Relay channels On when DMX is applied and Off when DMX is no longer present

Yes

Yes

Yes

Dimmer channels can be 8 bit or 16bit

Yes

Yes

Yes

Visual Alarms for Phase fail, over temperature and loss of DMX

Yes

Yes

Yes

PTFD Dimming (Pulse Transformer Fired Dimming)

Yes

Yes

Yes

Local Riggers Control

Yes

Yes

Yes

Auto Fan Control (user defined)

Programmable

Colour Touchscreen with simple and intuitive navigation

Yes

Yes

Yes

Output connector options:

 

/A

12 x 3-pin 15A Australian GPO style connectors

N/A

6 paired Australian 20A GPO outlets

/S

12 x Shuko Connectors

12 x Shuko Connectors

N/A

/T

Hardwired (terminals)

/W

2 x Wieland (Harting) 16-pin multi-pole connectors

2 x Wieland (Harting) 16-pin multi-pole connectors

N/A

/X

2 x 19-pin Socapex multi-pole connectors

2 x 19-pin Socapex multi-pole connectors

N/A

Power Supply

Nominal 220-240 Volts. 3-phase star. 50-60Hz
(Single phase operation possible - 63A max)
Operating range typically 190-260V, 45-65Hz.
100-120 Volt models available on request

Power Input Connection

Export models are supplied with an M25 Nickel Plated Brass cable gland for installing power cable.
A 1.2m length of 3-phase cable provided with the GenVI (but not fitted).
Hard-wired models are provided with 5 screw terminals for input power - no cable.

Control Input

DMX512 (1990) or DMX512-A (E1-11) and RDM (E1-20) via Front panel mounted 5-pin AXR in and thru connectors

Case

19" 3RU rackmount

Product Dimensions

W483 x D300 x H132 mm (W19.0 x D11.8 x H5.25 inches)

Product Weight

18.5kg (40.7lb)

21kg (46.2lb)

18.5kg (40.7lb)


For further information please contact your Pro Systems Group dealer.

More about this product

Galleries: